Advertisement
,_
RULES FORSAFE OPERATION
_lk
•
Always read Owner's Manual before using sprayer.
I
Always wear protective goggles, gloves, and clothing.
Q
Never spray flammable materials.
•
Always read and follow chemical container label instructions
before use.
•
Never leave sprayer in the sun.
•
Always release pressure in sprayer before disassembling.
•
Never store material in tank.
•
Always release pressure, empty and clean sprayer after use.
•
Never modify sprayer from original condition.
WARNING
IMPROPER USEORFAILURE TO FOLLOW INSTRUCTIONS C ANRESULT IN
EXPLOSION CAUSING MAJORINJURY. FORSAFEUSEOFTHISPRODUCT YOU
MUSTREAD ANDFOLLOW ALLINSTRUCTIONS B EFORE USE,
PRE-USE SPRAYER SAFETY INSPECTION:
1. Check tightness of hose clamp with screwdriver to be sure hose
is securely attached to the tank outlet nipple.
2. Inspect hose for deterioration, cracks, softness or brittleness, If
any of these conditions are found, replace hose before using.
Replace with original manufacturer's parts only.
3. Remove pump {SEE PRESSURE RELEASE INSTRUCTIONS)
4. }nspect interiorand exterior of tank for signs of deterioration (i,e.
rust, cracks, bubbling and/or pitting) of body and bottom. Any
sign of deterioration indicates possible tank weakening and
could result in explosive bursting under pressure. If any of these
signs are found, DISCARD TANK IMMEDIATELY.AND REPLACE,
CAUTION: Do not attempt to patch leaks, etc. as this could result in serious
injury,
5. Forpressure testing or to become familiar with sprayeruse, u=e
water only, and follow steps 1,2,5,6 and 7 ofFILLING
INSTRUCTIONS.
6. Once unit is filled with water, inspect for leaks by following
PRESSURIZING INSTRUCTIONS, except that in step 2, only pump
piunger 8 to 10 strokes.
7. After inspection is completed, pump p[unger until it works hard
and lock handle.
8. (FOLLOW SPRAYING INSTRUCTIONS) to verify desired spraying
patterns and practice spraying.
9. Torelease pressure (SEE PRESSURERELEASING INSTRUCTIONS)
10. Empty tank.
11. Proceedwith filling, pressurizing and sprayinginstructions with desired
chemical solution.
Advertisement
