Towing A Disabled Vehicle; Removing And Installing Vehicle Battery - Chery Automobile User Manual

102 – IN CASE OF AN EMERGENCY
Fuse Color Amperage
Pink
Yellow

Towing A Disabled Vehicle

NOTE: Your vehicle is equipped with
tow hooks at both the front and rear.
CAUTION!
Observe the following guidelines when
towing the vehicle:
• Tow the vehicle slowly and smoothly
to avoid damage.
• If the vehicle needs to be steered
while being towed, the ignition
switch must be in the ON position,
not in the LOCK or ACC position.
CAUTION!
40 A
• Power brake and power steering as-
60 A
sist is not available when the engine
is off. The required operational
force for steering and braking is in-
creased significantly.
• Do not attempt to tow this vehicle
from the front with sling type tow-
ing equipment. Damage to the front
fascia will occur.
Removing and Installing
Vehicle Battery
The following steps must be taken
when removing and installing the bat-
tery:
• Turn the ignition switch and all elec-
(Continued)
trical devices off.
• Remove the negative (-) battery
cable.
Chery Automobile Co., Ltd.
(Continued)
• Remove the protective cover from the
positive (+) battery cable, and re-
move the cable.
• Remove the battery hold down, and
remove the battery.
• Install the new battery, when install-
ing the battery, connect the positive
(+) battery cable first and then the
negative (-) battery cable.
• After the new battery is installed, the
vehicle may perform unusually while
driving. This is normal due to the en-
gine control system readapting to the
vehicle's driving conditions.
NOTE: For proper disposal of a used
battery, see an authorized Chery dealer
or a local qualified waste disposal sta-
tion.