Epson Stylus Pro 7900 CTP User Manual page 3

Installing the Large Plate Guide on the Printer
To ensure proper registration when printing on Epson DirectPlate Aluminum plates, you need to install the
large plate guide on the printer.
Open the roll paper cover on the printer.
1.
Remove the roll paper if installed (see the Epson Stylus Pro 7900/9900 Printer Guide for information).
2.
Remove the small plate guide if installed.
3.
Locate the first and last slots in the back row of slots.
4.
Insert the rear tabs on the bottom of the guide into the first and last slots of the printer.
5.
Once the rear tabs are in position, the front of the paper guide lies on the top of the printer.
Installing the Large Plate Guide on the Printer |
Location of
first slot
3