For Vcr (Or Other Video Recorder) Control - Bose LIFESTYLE DVD Operating Manual

CONTROLLING EXTERNAL SOURCES
3. Choose the device code:
* From the menu options on the left, select CBL° SAT Code.
. Move right to select the first code.
. Press the CBL-SAT 0 n/0ffbutton on your LIFESTYLE ® remote. Press the button again.
If the cable or satellite box turns off and on, you have chosen the right code.
If not, select another code, and press the CBL- S AT 0n/0ffbutton two more times.
. When you have chosen the right code, press Enter.
. Press System or Exitto leave the System menu.
When you complete these settings, you can use CBL-SAT 0n/0ffto turn on your cable or satellite
source, and use other LIFESTYLE ®remote buttons to operate it. If you have both a cable and
satellite box, use AUX to connect the second device and to select it as the source.
For VCR (or other video recorder) control
The list of VCR brands and codes include selections for DVRs (or PVRs) and DVD recorders,
as well. By following the instructions below, you can set the remote to control one or the
other, but not both.
If you have both a VCR and a DVR, set up one as VCR and the other as AUX.
Follow the VCR process below:
Turn on your VCR or other video recorder. Turn on the TV and be sure to select the Video
input on the TV for the media center. Then, using the LIFESTYLE ®remote control, press the
VCR source button and follow the steps below.
1. Identify the device:
• From the RemoteControloptions in the System menu, select VCR Device.
• Move right and select a device from the multiple options by pressing Enter.
2. Identify the brand:
• From the Remote Control options in the System menu, select VCR Brand.
• Move right into the list of brands and up or down to locate your brand of VCR or DVR.
• Press Enterto select the brand.
3. Choose the device code:
• In the menu options on the left, select VCR Code.
• Move right to select the first code.
• Press the MCR 0n/0ffbutton on your LIFESTYLE ®remote. Press this button again.
If the VCR or DVR turns off and on, you have chosen the right code.
If not, select another code, and press MCR 0 n/0fftwo more times.
• When you have chosen the right code, press Enter.
= Press System or Exitto leave the System menu.
24