Error Messages; Paper Size Check; Ink Cartridge - Epson Stylus Pro 3800 User Manual

Error Messages

Message
BORDERLESS ERROR
PRESS THE DOWN BUTTON.
LOAD THE CORRECT SIZE
PAPER
CLEANING ERROR
PRESS THE CANCEL/RESET
BUTTON
CLEANING ERROR
PRESS THE DOWN BUTTON
AND REMOVE THICK PAPER
COMMAND ERROR
CHECK DRIVER SETTINGS
FRONT FEED SLOT OPEN
CLOSE THE FRONT MANUAL
FEED SLOT
FRONT FEED SLOT OPEN
LOAD MEDIA
PRESS THE DOWN BUTTON
FRONT FEED SLOT OPEN
PRESS THE DOWN BUTTON
AND REMOVE PAPER
FRONT SLOT CLOSED
OPEN THE FRONT MANUAL
FEED SLOT
INK CARTRIDGE ERROR
CHECK CARTRIDGE
INK CARTRIDGE ERROR
PLEASE INSTALL THE
CORRECT CARTRIDGE
INK CARTRIDGE ERROR
PRESS THE UP BUTTON
REPLACE THE CARTRIDGE
INK CARTRIDGE ERROR
REPLACE CARTRIDGE

INK CARTRIDGE

NON-GENUINE CARTRIDGE
MAY NOT PERFORM AT
OPTIMUM. CONTINUE?
<YES NO>
INK CARTRIDGE
PLEASE USE GENUINE EPSON
INK CARTRIDGES
INK CARTRIDGE
REPLACE INK CARTRIDGE
Explanation
The installed paper is not supported
for borderless printing or the

PAPER SIZE CHECK

setting is off.
The nozzles are still clogged.
Print head cleaning cannot be started
because thick paper is loaded.
Damaged data was sent to the printer
or the data has an incorrect command.
The installed printer driver is not
correct for the printer.
The front tray is open during operation.
The front tray is open, but no paper is
loaded.
Paper is loaded in the front tray.
The front tray is closed during
operation.
The wrong type of cartridge is
installed.
An ink cartridge that cannot be used
with this printer is installed.
An ink cartridge is installed incorrectly
(perhaps in the wrong slot).
There is a problem with one of the ink
cartridges. It may be installed in the
wrong slot.
The wrong type of cartridge is installed
or is installed in the wrong slot.
A non-genuine ink cartridge is installed.
The ink cartridge is expended.
Response
Press the Paper feed button, and then load a different size media. Also,
d
select ON for PAPER SIZE CHECK
+
Press the Cancel button, then run the Head Cleaning utility. See
"Checking and Cleaning the Print Head" on page 12.
Remove the thick paper.
+
Stop printing and press the
+
Stop printing and press the
that the installed printer driver is correct for the printer.
Close the front tray.
Load a sheet of paper in the front tray, and then press the
button.
Press the d Paper feed button, then remove the paper from the front tray.
Open the front tray by pressing it gently (see page 7). If necessary, remove
the paper.
Remove the ink cartridge and install one that is designed for your printer.
See "Replacing Ink Cartridges" on page 14.
Remove the ink cartridge and install one that can be used in your printer.
See "Replacing Ink Cartridges" on page 14.
Press the Ink cover open button to open the ink cover. Then remove the
u
ink cartridge and install it correctly. See "Replacing Ink Cartridges" on
page 14.
Remove the ink cartridge and reinstall it correctly. If this message appears
after reinstalling the ink cartridge, replace it. See "Replacing Ink Cartridges"
on page 14.
NO Menu r
Select (press the
with a genuine Epson ink cartridge. See "Replacing Ink Cartridges" on
page 14. Otherwise, select YES
Replace the ink cartridge with a genuine Epson ink cartridge. See "Replacing
Ink Cartridges" on page 14.
Install a new ink cartridge. See "Replacing Ink Cartridges" on page 14.
12/06
Epson Stylus Pro 3800
in the printer's menu system.
Cancel button for 3 seconds.
Cancel button for 3 seconds. Then make sure
Paper feed
d
button) if you want to replace the ink cartridge
(press the button).
l
Epson Stylus Pro 3800 - 9