Imager Settings - Worth Data 5202D Scanner Owner's Manual

Imager Settings:

disable LED illumination
Illumination Mode enable LED illumination
LED illumination alternating
disable laser aiming and LED illumination
Aiming On/Off enable laser aiming
disable laser aiming
enable central reading
(read only a code that the laser aims at)
Central Reading
disable central reading
(read the entire image)
careful mode (good for hard to read codes)
standard mode
1D Code
Decode Mode
semi-quick mode
quick mode (good for easy to read codes)
disable scanning from LCD display
LCD Display
Scanning
enable scanning from LCD display
AF system = laser and contrast
Auto Focus
AF system = contrast only
Mode
AF system = laser only
Note: Normally laser ranging is used for reading labels. In case it cannot be used in a brightly-lit
environment, the contrast method is used. When "contrast only" is configured, the reading speed will
be slower.
short range = 90mm
Fixed Focus
medium range = 163mm
Mode
long range = 880mm
default
default
default
default
default
default
A-49
,D3A,
,D39,
,D3B,
,D3C,
,D3D,
,D3E,
,D00,
,D0Z,
,DM3,
,DM2,
,DM1,
,DM0,
,D3I,
,D3J,
,E8K,
,E8L,
,E8M,
,E8N,
,E8O,
,E8P,