Worth Data 5202D Scanner Owner's Manual page 10

Start Setup
,ZZ,
UPC-A Settings:
UPC-A
leading zero
check digit transmission
UPC-E Settings:
UPC-E
leading zero
check digit transmission
UPC-A,E conversion
UPC-E1 conversion
UPC Supplement Settings:
UPC Symbologies
UPC without supplement (default enable)
UPC with 2-digit supplement
UPC with 5-digit supplement
note: setting any symbology to exclusive will disable all other symbologies
UPC
UPC-A, no leading zero, transmit check digit
UPC-A, no leading zero, not transmit check digit
UPC-A, leading zero, transmit check digit
UPC-A, leading zero, not transmit check digit
UPC-E, no leading zero, transmit check digit
UPC-E, no leading zero, not transmit check digit
UPC-E, leading zero, transmit check digit
UPC-E, leading zero, not transmit check digit
transmit UPC-E
transmit as UPC-A
disable UPC-E1
enable UPC-E1
,J1, ,R1, ,X4B,
,J2, ,R2, ,X4C,
,J3, ,R3, ,X4D,
,ZZ,
Exclusive Enable
A-4
End Setup
,E3,
default
,E5,
,E2,
,E4,
,E7,
default
,E9,
,E6,
,E8,
,6Q,
default
,6P,
,KP,
default
,KQ,
Disable