Mounting The Rangehood - Zephyr AK6500 series Use, Care And Installation Manual
Ak6500 series; ak2500 series;
Hide thumbs
Also See for AK6500 series:
- Use, care and installation manual (8 pages) ,
- Use, care and installation manual (17 pages)
Table of Contents
Advertisement
iNSTALLATiON
MOUNTING THE RANGEHOOD
ELECTRICAL
All Electricalwork must by performedby qualifiedelectricianor personwith similar technical
know how and background.
Forpersonal s afety,removehousefuseor opencircuitbreakerbeforebeginning installation.
Donotuseextension cordor adapterplug with this appliance.
FollowNationalelectricalcodesor prevailinglocalcodes and ordinances.
Electrical Supply:
This appliance requires a 120V 60Hz electrical supply., and connected to an individual, properly
grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse.Wiring
must be 2 wire w/ground. Pleasealso refer Electrical Diagram labeled on product.
Cable Lock:
A cable locking connector (not supplied) might also be required by local codes. Checkwith local
requirements and codes, purchase and install appropriate connector if necessary.
]
CableLock
Models: A K6500,AK6536,AK6542,AK2500,AK2536 Page4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AK6500 series and is the answer not in the manual?
Questions and answers