Zenith L26W56SA Installation And Operating Manual page 53

The CAi_PORTAuto Sense function is enabled when:
1. InstaLLer Menu Item 34, CAMPORTEN is set to 1 AND
2. InstaLLer Nenu Item 40, AUTOCANPORTis enabled (1).
SeLectabLe=Can be accessed with TV/AV key, direct access, etc.
Auto Sense= Switches to this input when connector is inserted.
The camport (Front Video) has the highest priority and wiLL
override any commands Mc[uding tuning to the Start ChanneL.
CAMPORT (Front Video) Functionality Control
Item 34 Item 40
CAMPORTEN AUTO CAMPORT
0 0
0 1
1 0
1 1
Front Video
Operation
DisabLed
DisabLed
SeLectabLe
Auto Sense
CAMPORT Operation (Stand-Atone)
When Camport Auto Sense is enabled as above, the TV's source
wilt switch to the front video whenever a plug is inserted into
airy of tire front panel video inputs (either composite Video or
S-Video).
When the plug is removed, the TV wiLLswitch back to the
previous
channel or input source that the TV was using before the plug
was inserted. However, if any direct access to an RFchannel or
Aux channel is requested white the camport is active, then,
when the camport plug is removed, the TV wiLLswitch to the
Last requested channeL. Source changes using any Source Keys
(TV/AV) are ignored. Channel Up/ChanneL Down arrd FLashback
Commands are not direct access tuning commands and they are
aLso ignored.
Previous State Operation State State
Before [nserting While CAMPORTIs Upon Removal
CAMPORT Active Of CAMPORT
Aux or RFChannel None Previous Aux
or RF Channel
Aux or RFChannel Direct Access Last Requested
RFor Aux Channel
Aux or RFChannel Ch Up/Down, Previous Aux
FLashback or RFChannel
and TV/AV Keys
CAMPORT Operation (PPV)
The operation wiLLbe similar to that of the Stand-Atone mode.
However, the PPV providers may send different commands to
the TV for the same user commands. For instance, some
providers wiLLaLways send a direct tune command when it
receives a channel up/down or a flashback command while
other PPV providers wiLLjust send a key command.
Previous State Operation
Before Inserting While CAMPORT
CAMPORT [s Active
Aux or RFChannel None
Aux or RFChannel Direct Access
Aux or RFChannel
Ch Up/Down,
FLashback
and TV/AV Keys
State
Upon Removal
Of CAMPORT
Previous Aux
or RF Channel
Last Requested
RFor Aux Channel
Last Requested
Channel if PPV
translates it to direct
access tuning
command. Otherwise,
goes to Previous Aux
or RF Channel
PAGE 53