Zenith L26W56SA Installation And Operating Manual page 12

Connect cable service and a VCRto the LCD IV/Monitor.
Locate the Antenna/Cable jack on the
back of the VCR.
Connect the cable service wire to the VCR,
Connect other wires according to the
diagram to the Hght.
After all connections are complete, ptug
in the W. The LCD W/Monitor is designed
to operate on AC power,
|
|
For cab[e box operation, _eave the VCR
and the television tuned to channel
three or four and use the cab|e box to
change channels,
PAGE
12