Zenith L26W56SA Installation And Operating Manual page 48

(Continued from previous page)
094 -
SAP MENU EN (2nd Audio Program)
Set to 1 to enable SAP feature, if avaiLabLe.
Set to 0 to disable SAP feature.
096 - DEF. ASP. RATIO (Default Aspect Ratio)
SeLects default aspect ratio at power up, see settings below.
Set to 0 for set by program.
Set to 1 for 4:3.
Set to 2 for 16:9 (Factory DefauLt).
Set to 4 for Zoom 1
Set to 5 for Zoom 2
102 - ATSC BAND
Sets up TV to receive different types of incoming signals:
O=Broadcast, I=CATV, 2=HRC, 3=IRC, 4=Same as NTSC.
103 - ATSCTUNE MODE
SeLects ATSCtuning mode: O=Virtua[, 1=PhysicaL
Note: The setting above is ignored if InstaLler item 102 ATSCBAND,
is set to I=CATV, 2=HRC, or 3=IRC. Then 103 - ATSC TUNE MODE
above always resets itself to Physical (1), regardless of what value
appears for item 103 on the InstaLLer menu.
104 - START MINOR CHANNEL
Sets XX XX minor starting channel at power up: O=NTSC.If not O,
number
selected is the Minor start channel numbel.
106 - ASP RATIO LOCK (Aspect Ratio Lock)
Set to 1 to retain previous aspect ratio with power Off.
Set to 0 to retain default aspect ratio with power Off. See item 96
DefauLt Aspect Ratio above.
107 - BANNER SELECT
Not appLicabLe.
116 - VIDEO MUTE EN (Video Mute Enable)
Set to 0 for normaL.
Set to I for blank.
117 - FACTDEFAULT(Factory Default)
Set to 0 for normaL.
Set to 1 to toad default settings for all installer menu items.
WARNING: Setting this to i will reload the factory
_ efaults and clear the channel list including erasing any
assigned Channel Icons and LabeLs.
PAG E 48