Wake Up Timer; Sleep Timer - Zenith TVSB1340V Operating Manual & Warranty

The Wake Up Timer function turns on the
TV/VCR after a desired period of time without
using the POWER button.
NOTE:
• Use the remote control for this procedure.
• Clock must be set to the correct time before
setting the timer.
• If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will
start playback automatically on your desired
time.
Press the WAKE UP/SLEEP
button once, and confirm
"ON/OFF" is pointed to.
Press the EFWD/I_ or
REW/II button until [ON]
appears.
WAKE UPS- ON/OFf_ON
TIMER TV/TApE_L T"
Press the PLAY/A or
STOP/V button until
it points to "TV/TAPE".
Press the F.FWD/I_ or
REW/_I button, and select
[TV] or [TAPE].
Press the PLAY/A or
STOP/V button until
it points to "TIME".
Press the RFWD/I_ or
REW/_I button until your de-
sired wake up time appears.
WAKE UP ONIOF_ [ON]
_/T FP_ TIMER TV/TAPE[T_]
Each additional push will increase (or decrease)
the time by 10 minutes.
Press the MENU button to return to TV mode.
TO CANCEL THE WAKE UP TIMER
Repeat step [1] but select [OFF].
The Sleep Timer function turns off the TV/VCR
automatically after a desired period of time.
NOTE:
• This function does not operate during
Recording mode.
Press the WAKE UP/SLEEP button on the
remote control until "SLEEP TIMER" appears.
Press the PLAY/A.
STOP/V, F.FWD/I_ or
REW/II button until your
desired sleep time appears.
Each additional push will in-
crease the time by 30
minutes up to 120 minutes.
f "I
SLEEP TtMER [2_00J
Press the MENU button to exit the Sleep Timer
setting.
' ,!, 5 _L_BPTIMER
Press the WAKE UP/SLEEP button on the
remote control until "SLEEP TIMER" appears.
Then, press the PLAY/A, STOP/Y, EFWD/_ or
REW/_4 button and select [OFF].
To view the time left for sleep timer press the
WAKE UP/SLEEP button twice; then press the
MENU button to exit the sleep timer setting.
- 32 - EN
9F06