Zenith TVSB1340V Operating Manual & Warranty page 10

9 RECORD indicator-
Flashes during recording.
Lights up in the Stand-by mode for
Timer Recording.
10 Remote Sensor Window-
Receives the infrared signals from the remote
control.
tl CHANNEL • / • buttons-
Press to select the desired channels for viewing or
recording.
TRACKING function- Press to minimize video
'noise' (lines or dots on screen) during playback or
slow mode.
12 VOLUME • / • buttons-
Adjust the volume level
13 POWER button-
Press to turn TV/VCR on and off. Press to activate
timer recording.
14 Cassette slot-
Insert the cassette here.
15 Number buttons-
Press to select desired channels for viewing or
recording. To select channels from 1 to 9, first
press the 0 button and then 1 to 9.
+100 button- When selecting cable channels
which are higher than 99, press this button first,
then press the last two digits. (To select channel
125, first press the "+100" button then press "2"
and "5").
16 MENU button-
Press to display the main menu on the TV screen.
17 SLOW button-(Remote only)
Press to start slow motion playback, The slow
speed can be controlled by pressing the F.FWD
button (faster) or the REW button (slower).
18 QUICK-FIND button- (Remote only)
Quick-Find mode. For more information, please read
page 26.
19 JOG&SHUTTLE button- (Remote only)
Press to use the Jog Dial or the Shuttle Ring.
20 Jog Dial- (Remote only)
Turn to advance one frame in the forward or
backward direction at the speed with which the dial
is turned during the Jog & Shuttle mode.
21 Shuttle Ring- (Remote only)
Turn to make rewind or fast forward speed faster in
the forward or backward direction during the Jog &
Shuttle mode. The further the Shuttle Ring is
rotated, the faster the playback speed.
22
CM Skip button-
Each time this button is pressed during tape
playback, the VCR will fast4orward 30 seconds of
tape time, up to 180 seconds.
23 DISPLAY button-
Display the counter or the current channel number
and current time on the TM screen.
24 SPEED button-
Press to choose the desired recording speed:
SP/SLP.
25
COUNTER RESET button- Press to reset
counter to 0:00:0O.
Press to cancel a timer program setting
(See page 31).
26 GAME button-
Sets the game mode and external input mode at
the same time.
27 TIME SEARCH button-
Press to activate Time Search mode.
28 PAUSE/STILL button-
Press to temporarily stop the tape during the
recording or to view a still picture during playback.
Frame Advance function- Press to advance the
picture one frame at a time during Still mode.
29 MUTE button-
Mutes the sound. Press it again to resume sound.
30 WAKE UP/SLEEP button-
Sets the Wake up or Sleep Timer.
31 Power cord-
Connect to a standard AC outlet (120V/60Hz)
32 ANT. terminal-
Connect to an antenna or cable system.
- REAR VIEW -
io o o
_ 31 32
- 10- EN
9F06