Channel Set Up Again - Zenith TVSB1340V Operating Manual & Warranty

SET UP FOR USE
CHANNEL MEMORY PROGRAMMING
Use this feature to program the TV/VCR tuner to scan and memorize all the channels you receive in
your area. Use the remote control for this procedure.
You can use this feature to memorize cable channels only if your cable system connects directly from
its wall outlet to the Antenna terminal of your TV/VCR. You cannot use this feature when the TV/VCR
is connected to a cable or satellite box.
- _L
lq 1he TW',IL;H b:)_ " r
Plug the TVNCR power cord into a
standard AC outlet.
"TU/
Press the POWER button to turn on
the TV/VCR.
I •
(_ Select"ENGL_Si' :r
Select "ENGLISH" or
"ESPANOL"=Spanish using
the F.FWD/_ or REW/II
button. "[ ]" indicates the
selected language.
SETUp -
LANGUAGE
[ENGLISH} ESpANOL
AUTO PRESET
/4 [}egin auto pre_;_
Press the PLAY/A or [" SET O P -
STOP/V button to point to L LANGUAGE
[ENGLISH I ESPANOL
"AUTO PRESET".
AUTO PRESET
Then press the F.FWD/I_
button. The tuner scans and
memorizes all active channels in your area.
NOTE:
• The TV/VCR distinguishes between standard
TV channels and cable channels.
• If you want to play or record a video tape
BEFORE presetting the tuner, you must press
the MENU button. To preset the tuner again,
see "CHANNEL SET UP AGAIN" on page 14.
_> After scanl3iP, S:
The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you
can select the desired channel directly with the
remote control number buttons or CHANNEL •
or•.
The channels you no longer receive or seldom
watch can be deleted from the memory. (Of
course, you can add the deleted channel into the
memory again.)
Press the MENU button.
Press the PLAY/A or
STOP/V button to point to
"CHANNEL SET UP".
Then, press the F.FWD/I_
button.
MENU
TIMER pROGRAMMING
PICTURE CONTROL
SE_ING CL(_3K
CHANNEL SET Up
USER'S SET Up
V CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
l = CHANNEL SET UP -
I_ ADD t DELETE CH (TVI
AUTO PRESET
Press the PLAY/A or
STOP/V button to point to
"ADD/DELETE CH".
Press the EFWD_I_ button.
Press the PLAY/& or
STOP/V button until your
desired channel number o8
appears. (You can also use
the number buttons or the ADD/DELETE
CHANNEL • / • button to
enter it.)
Press the EFWD/II_ or REW/_I button.
The channel number changes to light red.
The channel is deleted from memory.
If you press the F.FWD_ or REW/_I button again,
the channel number changes to light blue.
The channel is added to memory again.
To delete another channel, repeat steps 3 and 4.
5 Fi;_t the ch_nne! setu[_ mode
Press the MENU button to return to TV mode.
NOTE: Press the CHANNEL • or • button to
confirm that channel(s) have been deleted or
added.
- 13- EN
9F06