To Cancel The Sleep Timer; Wake Up Timer - Zenith TVSC2040F Operating Manual & Warranty

• "41 *
The Wake Up "Nmer function turns on the
TV/VCR after a desired period of time without
using the PWR(POWER) button.
NOTE:
• Use the remote control for this procedure.
• Clock must be set to the correct time before
setting the timer,
• If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
1
Select "WAKE UP TIMER"
Press the WAKE UP/SLEEP [ T,_, _' _'_ _t
button on the remote control /
once, and confirm "ON/OFF"
is pointed to. { WAKE u. ,- O ,,OFF O _
Press the F.FWD or REW _ T,'_A"EI;_"_
button until [ON] appears.
2 Select "TV" or "TAPE"
Press the PLAY or STOP
button until to point to
"TV/TAPE".
Press the F.FWD or REW
button, and select [TV] or
[TAPE].
3 Set wake up time
Press the PLAY or STOP
button until it points to
"TIME".
Press the F.FWD or REW
button until your desired
wake up time appears.
TIMER W/tAPE
• TIME • •
Each additional push will increase(or decrease)
the time by 10 minutes.
4
Exit the Wake Up Timer setting
Press the MENU button on the remote control to
return to TV mode.
TO CANCEL THE WAKE UP TIMER
Repeat step [1] but select [OFF].
The Sleep "Rmer function turns off the TVNCR
automatically after a desired period of time.
NOTE:
• This function does not operate during
Recording mode.
I Select "SLEEP TIMER"
Press the WAKE UP/SLEEP button on the remote
control until "SLEEP TIMER" appears•
2
Set sleep time
Press the PLAY, STOP,
F.FWD or REW button until
your desired sleep time
appears.
Each additional push will SLE_,T,M_. I_0_l
increase the time by 30
minutes up to 120 minutes.
Press the MENU button on the remote control to
exit the Sleep ]3mer setting.
TO CANCEL THE SLEEP TIMER
Press the WAKE UP/SLEEP button on the remote
control until"SLEEP TIMER" appears.
Thee, press the PLAY,STOP, F,FWD or REW
buttonand select [OFF].
To view the time left for sleep timer pressthe
WAKE UP/SLEEP buttontwice;then press the
MENU button on the remote controlto exit the
sleep timer setting.
- 30 - EN
9K16