Zenith A50M84W Operating Manual page 42

PA G E 42 I REFERENCE
I
MAINTEN._NCE
f
Somequick
and easy
tips to fixing
problems
yourself.
Remote control doesn't work.
• Makesure the batteriesare fresh and instaLledproperty.
Menu options can't be
changed or selected.
• Tnj unplugging your EntertainmentMachinefor a few minutes,
then plug it backin.
No pictureor sound
whenanynon-cabLe s ource
is selected.
Check to see if the source equipment has been turned on.
Make sure that the connections are secure on the back of your Entertainment
Machine and on the source equipment.
Weak or no Stereo Sound
_when using a stereo VCR.
• Checkto see if aU the connectionsare secure.
• Lookin the Audio mode menuto see if aLL the settings are correct.
• You are usingchannel 3 or 4 to view your VCR.No stereo soundis present
underthat decision.
The PIP inset is black or
lacks contrast.
• You might want to adjust the PIP picturesettings underthe PIP menu.
• Checkthat all the wiresare connectedproperty.
• Checkto see if yourinput sourcefor PIP is set correctly.
The PIP inset is "snow" when
the sourceis Ant/CabLe 1.
• Lookto seeif the TV/VCRbutton on your VCRhasPtheTVselected.
Time is incorrect.
• Automatic:Checkto seeif PBSChannel is correctand then check
TimeZone/DayEghtSavingstime settings underCLockmenu. Channel!timeData
might not be presenton PBSChannel(use manual setting).
• ManuaL: M akesure the time was set initiaLLy. ProbabLy powerwas Lost.
If oUelse.toils,cog1-847-39I..8752, then push 5, between 7:00 am and 8:00 pm _ntral Standardtime.
206-335g-0