Advertisement
17. Program AE with special
lY'. * The Operation
Switch
is set to
lY'. ,_Set the Operation
Switch to
effects and Fade/Wipe
Effects
- _'1" and/or the Power Switch
"[]"
and/or set the Power
do not work.
is set to "5S".
Switch to " _"
or
18. The Black & White Fader
18. • The Sepia or Monotone
mode
18. ° Turn off Sepia and Monotone
does not worl<,
is activated.
(iL_" pg. 44).
19. Tile Dissolve
function
does
not work.
20.
The
Picture
Wipe
and
Dissolve
functions
do
not
work.
21. Tile picture wipe function
doesn't work.
22. Scene transition
does not go
as expected.
19. • Tile Sepia, Monotone
or Slow
Shutter mode of Program AE
with special effects is
activated.
The Squeeze mode is
selected.
The previously
selected mode
of Program AE with special
effects was changed after the
last selected scene for editing
was registered.
20. • The last selected editing
scene
is ending.
• At the end of the last selected
scene for editing, the Power
Switch was set to "OFF".
The power
is off.
21. • Tile Slow Shutter mode is
activated.
• The Squeeze or Cinema
mode
is selected in the Mode Menu.
22. • When
using "Picture
Wipe/
Dissolve" (L_" pg. 42) or
"Dissolves
during
5 second
recording
mode" (L_" pg. _0),
there is a delay of a fraction
of
a second between the
previous
record stop-point
and the Dissolve
stall-point.
This is normal,
but this slight
delay becomes especially
noticeable
when shooting
fast-moving
subject or during
rapid panning.
19. _ Turn off Sepia, Monotone
or
Slow Shutter before adding
Dissolve to a scene transition
_ _ pg. 44).
Make sure that the Squeeze
mode in the Mode Menu is
set to "OFF" (_-4_" p g. _8).
. Make sure you have selected
the mode of Program AE with
special effects you want
before starting editing
(_L_"pg. 44).
20. ,_Select Picture Wipe or
Dissolve before beginning
recording.
The effects are then
automatically
activated
(L _ pg. 42).
,_Do not turn off the
cal_]COl(ter_s
power after
setting Editdn and Edit-Out
points, as they will all be
erased (z_ _ pg. 42).
° The camcorder
automatically
shuts off after 5 minutes have
elapsed in the Record-
Standby mode. Make sure you
continue
operations
within
5
minutes after engaging
Record-Standby
mode
(_L_"pg. 42).
21. ,_Make sure the Squeeze mode,
Cinema
mode, or Slow
Shutter mode is not activated
when preparing
to use the
Picture Wipe function
(iL_" pg. 38, 45).
22.
Advertisement
