Advertisement
f
TRANS, Button
•
MENU/SET
DiM
POSITION CAMCORDERS
[For both receiving
and transmitting
camcorders]
Position
tile transnlitting
and
receiving
callicorders
so
that their
infrared
transmitter
and receiver
face each
other.
• Tile distance
between
them
should
be less than
1.6
ft. (SO cn/) and
the transmitter
and
receiver
should
be a/g
ed lo more
than
I 5" to each
other.
TRANSMIT
IMAGE
[For transmitting
camcorder]
Press START/STOP/TRANS.
Image transmission
starts
and the nlessage "TRANSMISSION
IN PROGRESS"
is
displayed.
RECEIVE IMAGE
[For receiving
camcorder]
Rotate MENU/SET
until "RE( EIVE" appears
and press
it. Image
reception
starts and the nlessage "RECEP-
TION
IN PROGRESS"
is displayed.
Reception
is
complete
when
the message disappears.
NOTES:
• Be sure to supply
power
from tile A(
P_wer Adapter/
Char_er
instead
ot tile batter), pack.
•_ /For trar_sn_itting
camcorder/
• Be sure to set "lrTrar_-P" back
to "OFF"
when
the
transmission
is finished.
• An image
with a title/frame
carl also be transmitted.
• If the message
"COMMUNICATION
FAILED"
is
displayed
within
appr_*x. 60 second_
after START/
STOP/TRANS.
is pressed,
check
the equil_ment
orientatiorb
power
slqJplies,
etc. and retry the
trarlsl)3issiorL
• To abort transmission
in the mirkl/e,
press START/
STOP/TRANS.
Tile message
"COMMUNI(
ATION
FAILED"
is displayed.
• /For receiving
camcorder/
• If the message
"COMMUNICATION
FAILED"
is
disl_layecl , check
the equipment
orierltatiorl,
power
supply
etc. arid retry the transmissiorr
• "lrTrarl-P" automatically
returns
to "OFF" when
the
reception
is complete
or it t]lil<
Advertisement
