Control Panel Settings - Epson Stylus Color 740i User Manual

Control Panel Settings

Changing control
panel settings
Specifications
You can change the following default settings from the printer's
control panel:
Setting Options
Font Courier, Roman, Sans Serif, Prestige, Script,
Roman T, Sans Serif H, Draft
Character table Italic U.S.A., Italic France, Italic Germany, Italic
U.K., Italic Denmark 1, Italic Sweden, Italic Italy,
Italic Spain 1, PC 437 (U.S./Standard Europe),
PC850 (Multilingual), PC860 (Portuguese), PC861
(Icelandic), PC863 (Canadian-French), PC865
(Nordic), Abicomp, BRASCII, Roman 8, ISO Latin 1
Follow these steps to change the settings listed above:
1 Make sure the printer is turned off and has paper loaded (at
least 8.27 inches [210 mm] wide).
R
2 Hold down the
button. The printer prints a summary of instructions for
changing settings and choosing a language for the instructions.
E
3 Press the load/eject button to print a list of current settings
(indicated with arrows) and additional instructions.
4 After you make the changes you want, turn the printer off to
save the settings. The settings remain in effect until you change
them again.
cleaning button and press the P power
Page 175