Windows System Requirements - Epson Stylus Color 740i User Manual

Caution:
Using an improperly
shielded USB cable—
especially a cable
more than 6.5 ft.
(2 meters) long—may
cause the printer to
malfunction.
Introduction
At least 16MB of RAM (20MB or more recommended)
At least 50MB of free hard disk space for storing images
(100MB recommended)
13-inch RGB display or better
Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
For serial connection, an ImageWriter
equivalent (8-pin mini DIN male/male, Belkin F2V024
recommended)
For USB connection to an iMac or Power Macintosh G3, a
shielded USB "AB" interface cable, from Series A (computer) to
Series B (printer) up to 6.5 ft. (2 meters) long

Windows System Requirements

To use your printer and its software with a PC, your system should
have:
®
An IBM compatible PC with at least a 386/25 MHz (for
Windows 3.1x), 486/25 MHz (for Windows 95 or Windows
®
NT 4.0), or 486/66 MHz (for Windows 98) processor
®
(Pentium processor recommended)
DOS, Microsoft Windows 3.1x, Windows 95, Windows 98, or
Windows NT 4.0
®
II serial cable or
Page 11