Recording The Contents Of Other Equipment; Using The Dv Cable For Recording - Panasonic Palmcorder PV-GS200 Operating Instructions Manual

Editing Modo
Recording the Contents of Other
Equipment
After connecting the Carncorder and the other
equipment as illustrated, start the following
procedures.
IS-VIDEO OUT]//I [_[VIDEO
OUT]
O AV Cable
I_ S-Video Cablo
Camcorder:
1 Set [TAPE PLAYBACK MENU] >>
[AV IN/OUT] >> [AV JACK] >> I'IN/OUT],
2 Insert an unrecorded Cassette.
Other Equipment:
3 Insert a recorded Cassette and start
playback.
Camcorder:
4 While pressing the [OREC] Button _D,
press the [_] Button _ on the Remote
Controller.
Or while pressing the [REC] But:ton _),
press the [BACK LIGHTj Button _) on the
Camcorder.
I ..... I
• When recording on a card, press the
[PHOTO SHOT] Button or the Recording
Start/Stop Button.
5 Press the [I I] Button _ or [l] Button @
to stop recording.
Other Equipment:
6 Press the Stop Button to stop playback.
• For arbor nerds concerning this itom, see -_-.
Usi.g t he OV for.ecor.i.g . ......
(Digital Dubbing)
By connecting this Cam_rder with other digital
vidco cquipment {such as another Carncorder of
the same formaYmcdel) that h;`_sa DV
input/output terminal, and using a 4-pin to 4-pia
BV Interface cable PV-BBCg!PV-DDC9-K
{optional) O, high qua,b/images ;.tad sounds Can
be dubbed in the digital mode.
Player/Rasorder:
1 Insert the Cassette and set to Tape
Playback Mode.
Player:
2 Press the [11_]Button _ to start playback,
®
®
-53-