With A Pc; Using The Software With A Computer; Using Usb Driver - Panasonic Palmcorder PV-GS200 Operating Instructions Manual

With a PC
With a PC Note:
If a window does not appear automatically, click
Using the Software with a Computer
the =St:.trt" Button on your desk'top and then clrok
An im;.tgo stored on the DV Cassette can be =Run". When the =Run" Box is open, type in
tr:.tnsforrod to your Personal Computer.
• Software Installation (Windows)
1 Turn on Computer and start up Windows.
2 Insert supplied CD-ROM into the CD-ROM
drive.
w[Sotup ivlonuj :.tppcars.
3 Select the software to be installed from
[Setup Menu].
• use Driver -5_-:
Software for USB Driver allows you to
transfer images directly from the Memory
Card into the computer.
• WebOam Driver-58-;
If the Camcorder is connected to your
personal computer, you can send video from
the Camcorder to the other patties via a
network or by Intornot.
• DV STUDIO 3,1 E-SE -_J-:
Using the DV STUDIO 3.1E-SE software
allows you to capture stills from video
rcoordod on a tape or still imagos viewed
through the lens of a camera.
• 8.726 Audio Decoder -_l-:
Sof_waro for G.726 Audio Decoder ;_tllowsyou
to listen to MPEG4 _ sound with Windows
Media Player.
*MPEG4 moving picture files can be recorded
by PV-GS200 only.
• AreSoft Software -_2-:
Photolmprossion 4.0, PhotoBase 4.0,
Panorama Maker 3.0 and PhotoPrfnter 4.0
are included.
• Windows Media Update
This update was provided by Miurosoft
Corporation. Run this update in oases where
playback of an ivlPEG4 moving picture file
recardod with a Camcordor is started in
Windows Media Player, but ends with an error
message after 3 to 4 minutes.
4 Follow the instructions on the computer
ecmen until the installation is complete,
• Setup window will disappear when the
installation is complete.
=D:\lnctMonu.oxe" and click '_3K". (=D"is used
when the CD-ROM drive is ddvo D.)
Using USB Driver
•
Operating
environment
• DespiIe having the operating environment
indicated, it may not be possible to use the
program with some bJpes of personal
computers.
• A CD-ROivl drive is required to install this
program.
OS:
IBM PC/AT compatible personal computer with
pro-installed;
Miurosoft Windows XP Homo Edition/
Professional
Miurosoft Windows 2000 Professional
Miurosoft Windows Mo (Millennium Edition)
Miurosoft Windows 98 Second Edition
CPU:
Intel Pontium II/Coleron 300 MHz or higher
]including compatible CPU)
RAM=
32 MB or more ]64 MB or more recommended)
]128 MB or more required for Windows XP)
Free hard disk space:
At Io_st 30 MB or more
Ports:
USe Terminal
•
Installing USB Driver
Please install USB Driver first before connecting
the Camcoidor to your Personal Computer with
the USB Connoution Cable.
1 Turn on the Personal Computer and start up
Windows,
2 Insert the supplied CD-ROM into the
personal computer's CD-ROM drive.
eQu{t :.tllappllcat{ons,
e[Sotup Menu] appears.
3 Click the [USB Driver].
eTho sot up program starts running,
4 For Windows gBSE/Me/20O0 usePs, click
]Restart] if the [InctallShield] dialog
appears.
eDO not remove the CD-ROM.
5 Finish installation by following the
on=screen instructions.
eOliu_: [Next] and proceed with installation.
eAfter completing the installation, Click
[Finish].
6 After the use Driver is installed, please
restart your computer.
-56-