Editing Mode; Recording From A Tape Onto A Card; Recording Pictures From A Card Onto A Tape; Audio Dubbing - Panasonic Palmcorder PV-GS200 Operating Instructions Manual

Editing Mode
Editing Mode
Recor ino f,om Tape onto a
Still pictures or moving pictures can be recorded
on a Memory Card from scones that have already
been recorded on a cassette. (moving pictures on
PV-GS200 Model only)
1 Set the Mode Dial _ to Tape Playback
Mode.
2 Still Picture:
Start playback and set the Cameorder to
Still Playback Mode at the scene you wish
to record, and press the [PHOTO SHOT]
Button (:_::).
Moving Picture (PV-GS200 only):
Start playback and press the Recording
Start/Stop Button (_ at the desired scene.
@£
Recording Pictures from a Card onto
a Tape
Card Imagos can be recorded to a Tape.
1 Set the Mode Dial _ to Picture Playback
Mode.
2 Display the first picture.
3 Press the [PHOTO SHOT] Button (_.
• During the copying, the following Indic;._tion
appears.
NOW _FC@_31Nt_]
elt takes a few seconds to record a picture to
the Tape.
•Whcn recording to tape, selcot the tape position
before recording. The picture will be recorded to
the tape position when the ]PHOTO SHOT]
Button is pressed at Stop 3.
• Photoshot index signals are automatically
recorded.
• Mcving pictures {MPEG) can be recorded from
a card to a tape on the PV-GS200 model only.
• For other notes concerning this [tom, see -_-.
Auto Dubb_g ..............................................................
YOU can add music or narration to the recorded
Cassette.
If a tape recorded in the [16bitj Mode is dubbed
with the Audio Dubbing function, the original
sound is erased. {It you wish to preserve the
original sound, use the [12bit I Mode when
recording.)
•Audic Dubbing cannot be performed on a
recording made inLP Mode. {-2_=)
1 Set [TAPE PLAYBACK MENU] >>
[AV IN/OUT] >> [AV JACK] >> [IN/OUT],
GD
2 Next, select [A.DUB INPUTJ >> [MIC] or
[AV IN].
eSct to [AV INl when ;.tn external device is
used, and to [MICI whoa an external or
built-in microphone is used.
3 Press the [I I] Button (_ on the Remote
Controller whore you want to add new
sound.
4 Press the [A.DUB] Button @ on the
Remote Controller,
-51-