Table of Contents
Advertisement
5
Start recording.
6
Move the joystick down to select the [∫]
icon to stop playback.
7
Stop recording.
≥For more information, refer to the operating
instructions for your TV set and recorder.
≥When you do not need functional indications or
date and time indications, press the [OSD]
button on the remote control for no indication.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
ª
When neither image nor sound from
the movie camera is output to the TV
set
≥Check that the plugs are inserted as far as they
go.
≥Check the connected terminal.
≥When no image is presented on the TV even if
set [BASIC] >> [AV JACK] >> [OUT/Ë], set to
[OUT]. (
)
-46-
Recording the contents of other
equipment
You can dub the contents of other equipment to a
DV cassette or card, and can record TV
programs.
≥Set to Tape Playback Mode.
1
Connect the movie camera and other
equipment.
21-pin Adaptor
AV/
S-VIDEO
≥Connect the movie camera and other
equipment by using the AV cable 1.
≥If the recorder has an S-Video terminal, then
also connect an S-Video cable 2 (optional). It
allows you to record clearer image.
≥If your recorder is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
[VIDEO OUT]
[S-VIDEO OUT]
[AUDIO OUT]
1
2
Edit mode
2
Set [BASIC] >> [AV JACK] >> [IN/OUT].
(Movie camera)
3
Set [ADVANCE] >> [REC STDBY] >> [YES].
(Movie camera)(Only when the Tape
Recording Mode)
≥The icon appears.
4
Turn the power on and start playback.
(Other equipment)
5
Start recording. (Movie camera)
Recording on a tape:
Move the joystick up to start recording.
Or, while pressing the [
remote controller, press the [
Recording on a card:
Press the [PHOTO SHOT] button.
6
Move the joystick of the movie camera
down or press the [∫] button on the remote
controller to stop recording.
≥While analog input pictures are being recorded
on a tape or when the movie camera is in
recording standby mode, the photoshot
recording is disabled.
7
Stop playback. (Other equipment)
≥Do not plug or unplug the cable during recording
or the recording may not be completed properly.
≥Carefully read the operating instructions for your
TV set and video equipment.
≥By operating as [SETUP] or [ADVANCE] >>
[AUDIO REC], set the recording sound mode
([12bit] or [16bit]).
≥If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
≥If a picture containing a copyright protection
signal (copy guard) is recorded, the message
"COPY PROTECTED" appears when recording
it on a tape and the picture is distorted by
mosaic-like patterns at playback.
≥When wide images are input, the display such
as the menu screen or the operation icon is
expanded horizontally.
¥
REC] button on the
1
] button.
T
¥
REC
A.DUB
V
W
/REW
PLAY
FF/
W
VOL
STILL ADV
PAUSE
STILL ADV
STOP
39
VQT0N69
Advertisement
Table of Contents
