If You No Longer Need Software Or Driver (Uninstall); Notes - Panasonic Palmcorder PV-GS200 Operating Instructions Manual

With a PC
Removing the USB connection eab}e safely
for Macintosh
1 Drop the [NONAME] icon which appeared
when you connected the Cameotder with
the USB connection cable into the recycle
bin, then disconnect the USB connection
cable.
If the above oper;.ttion is netpcrtormed correctly,
when data is copied from the Personal Computer
to an SD Memory Card, the copied data may be
damaged.
When the following operations are performed, the
same results will Occur as when the USB cable is
incorrectly removed (above). Therefore, it is
imperative that the above operation is completed
before proceeding.
eWhcn SD Memory Card is removed.
eWhcn Camcordcr power is turned OFF.
• When Mode Dial _ is turned to change
modes.
®
ff you no longer need software or
driver (Uninsta#)
The screens may vary with the type Of Ca.
1 Select [Start] (>> [Settings]) >>
[Control Panel[, select the software or the
driver from [Add/Remove Programs] to
uninatall.
eUninstalling steps may vary depending on the
OS. Please refer to the user manual of your OS.
Notes
• M;.teintesh isa registered tr;.tdcmark of Apple
Computer, Inc. AroSofl, the AroSeff logo,
AroSoff Phetclmprosaion 4.0, AroSeff
PhetcBaso 4.0, ArsSeft Panorama MaKer 3.0
and PhctePrintcr 4.0 are trademarks of AroSoft,
Inc.
• Microsoft, Windows _, Windows Messenger ®,
MSN Messenger ® and DiroctX ® are either
registered tr;.tdcmarKs or tr;.tdcmarKs of the
Microsoft Corporation in the United States
and/or ether countries.
• InteP, Pcntium ® and Ccleron ® arc the
registered trademarks or tradcmarl(s of the Intcl
Corporation.
cAll other names, company names, product
names, etc. in these instructions arc the
tradcmarl(s or registered tradcmarl(s of their
rospcctk_e c orporations.
mThe names ofthe productsyou are usingmay
differ from the names given in thetext.
Depending on the operating environment and
other factors, the contents of the screens used
in these instructions may net necessarily match
what you will see on your screen.
eAIthough the screens in these Opcmifng
Instructions are shown in English for the saF(e of
example, other languages are supported as
well,
eTheso instructions do not cover the basic
opemgons of the personal computer or define
any terms. For this information, refer to the
Operating Instructions which accompany your
personal computer.
• Do net disconnect USB Connection Cable while
the operation light of Camcorder ison, It may
freeze thesoftware or destroy the data in
tr;.tnsfer,
• We recommend using the AC adaptor as the
power source for the Camcorder when using
USB Connection Kit, D;_damay be lost If the
battery power is lost while transferring data.
i If the C;.tmcorder is used as ;_tWeb Camer;.t
while virus chocking coftwaro is running, the
Camcordeifs operation may stop midway
through. In this ease, exit the Windows
Messenger or MSN Messenger, reconnect the
Camcorder and restart the Windows Messenger
or MSN Messenger,
• G,726 may net recognize Memory Card files net
created by Camcorder.
• Do not delete the folders in Memory Card such
as picture folder. Memory card may not be
recognized if folders are deleted.
-65-