Panasonic KX-TG2570F Operating Instructions Manual page 25

Press OK [_.
• The unit announces the time/day. The clock starts working.
• If 6 beeps sound, the setting is not correct. The display will return to
step 4. Start from step 5.
• The display will return to step 4. To return to the stand-by mode,
press _ or wait for 60 seconds.
• In step 7, you cannot enter numbers greater than 12. Do not use
military time. (To set 13:00 hours, enter "0100" and select "PM" by
pressing (_.)
If a power failure occurs, the adjusted time/day will be erased.
Reprogram the current time/day.
To check the time/day
Repeat steps 1 to 6 on page 24.
• The current time/day is heard. When finished, press _.
For Caller ID service users (p. 32)
• The Caller ID information will re-set the clock after the first ring if the
adjusted time is incorrect. However, if the time has not previously been
set (p. 24), the Caller ID information will not adjust the clock.
• The Caller ID information will automatically adjust the clock for daylight
saving time.