Technics SH-AC500D Operating Instructions Manual page 8

Connections
G)
[] [] []
_---,Np •
] or
Optical-fiber
cable
(included)
Coaxial cable
(not included)
DIGITAL OUT
I
DVD player, etc (not included)
Coaxialcable(notincluded)
Optical-fiber cable
(notincluded)
power supply cord (included)
Household AC outlet
(AC 120 V/60 Hz)
DIGITAL OUT ._ f f DIGITALO._T
Other digital playback sources (laser disc players, etc.)
Connection for optical-fiber cable []
Dust-protection cap
"LINE IN" terminals
[]
(Only if a control amplifier has not been connected)
You can connect a set-top box tuner for digital television or similar
decoder
If "LINE" is selected with the input selector on this unit, the signals
received through these terminals are output as they are without
passing through any sound control circuits (ie no volume or other
sound adjustments can be made with this unit)
, _BIFJI
• Do not bend the optical-fiber cable at a sharp angle.
• If the digital optical connector is not going to be used, be sure to
attach the dust-protection cap to prevent exposure to dust
"DIGITAL 1" terminals []
Disconnect the coaxial cable from the DIGITAL 1 terminal when
using an optical fiber cable Only lhe coaxial cable is recognized if
both types are connected
"UNSWITCHED" AC outlet
[]
This is for the exclusive use of an audio component, tt can be used
to supply power to a component regardless of whether the unit's
POWER button is at the ON or OFF position. Use it for any unit
having a rating of 50 W or less
• Dolby Digital RF (radio frequency) signals cannot be decoded with
this unit even if a unit that has Dolby Digital RF output terminals is
connected to this unit
• Turn off the power to this unit if unusual hissing or beat
sounds are heard while listening to FM, AM, or television
broadcasts.