Panasonic Omnivision VHS PV-C2061 Operating Instructions Manual page 31

<Model PV-C2061 unit shown>
REW FF
• Auto Shut Off
No broadcast signal in TV, blank tape is
Played for 5 minutes
--) Power turns off
• This feature is canceled if any button is
pressed during above mode.
• Auto Playback
Insert a tape in Power off mode
•--) Power turns on
• Playback begins if tape has no record tab.
• Auto Rewind
Tape reaches its end
Rewind, --) Stop
• Playback Auto Eject (Repeat Play is "OFF")
Tape with no record tab reaches its end
-) Rewind, ---)Stop, -) Eject
NUMBER-
Keys
REW-
EJECT LIGHT
O@®
(Z) (Z) (3D!
(ZD (_3 QD
_co_{T
_-_3 000 0-|
mu_o _0
GO
SELECT/
--SET
A:CH UP
v:CH DOWN
)' :VOL UP
4 :VOL DOWN
-FF
TAPE
-POSITION
-SEARCH
To find out present tape position and amount of
tape remaining.
Tape position cannot be detected for
C-Cassettes, tapes under 30 minutes, and
some other tapes.
Press TAPE POSITION
to detect current tape position.
SlP
A 1 _0 MIN,
BEG N END
• "DETECTING TAPE
POSITION" is displayed only
when a cassette is first inserted
and it takes several seconds for
correct tape position to appear.
• The present tape position
indication and amount of tape
remaining (according to tape
speed) is displayed.
• Tape remaining time display
may not be precise.
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
O
• This function cannot display exact amount of
tape remaining for tapes over 120 minutes.
31