Important Safeguards And Precautions - Panasonic Omnivision VHS PV-C2061 Operating Instructions Manual

Important S afeguards a ndPrecautions
I READ AND RETAIN ALL SAFETY AND
OPERATING INSTRUCTIONS. HEED ALL
WARNINGS IN THE MANUAL AND ON UNIT
I INSTALLATION
1 POWER SOURCE CAUTION
Operate onlyfrom power source indicatedon unit
or in this manual. If uncertain, have your Electdc
Utility Service Company or Video Products Dealer
verity your home power source.
2 POWER CORD PLUG
For safety, this unit has a polarized type plug (one
wide blade), or a three-wire grounding type plug.
Always hold the plug firmly and make sure your
hands are dry when plugging in or unplugging the
AC power cord. Regularly remove dust, dirt, etc.
on the plug.
POLARIZED PLUG CAUTION:
The plug fits into outlet one way. If it cannot be fully
inserted, try reversing it. If it still will not fit, have an
electdcian install the properwall outlet. Do not
tamper with the plug.
GROUNDING PLUG CAUTION:
The plug requires a three-hole grounding outlet.
If necessary, have an electrician install the proper
outlet. Do not tamper with the plug.
3 POWER CORD
To avoid unit malfunction,and to protectagainst
electricalshock,fire or personal injury:
- Keep power cordaway from heating appliances
and walking traffic.Do not rest heavy objectson,
or rollsuch objectsover the power cord.
- Do not tamper with the cord in any way.
- An extensioncordshouldhave the same type
plug (polarizedor grounding)and mustbe
securelyconnected.
- Overloaded wall outletsor extensioncords is a
fire hazard.
- Frayedcords, damaged plugs,and damaged or
crackedwire insulationare hazardous and should
be replacedby a qualifiedelectrician.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated dudng operation. If blocked, heat
build-up may result in a fire hazard or heat
damage to cassettes.
For your protection:
a. Never cover ventilation slots while unit is ON,
or operate unit while placed on a bed, sofa,
rug, or other soft surface.
b. Avoid built-in installation, such as a book case
or rack, unless properly ventilated,
5 AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place unit over or near a heater or
regulator, in direct sunlight, etc. If unit is suddenly
moved from a cold place to a warm place,
moisture may condense in unit and on the tape
causing damage.
6 TO AVOID PERSONAL INJURY
• Never place unit on support or stand that is not
firm, level, and adequately strong.
The unit could fall causing sadous ,_1=.__.
injury to a child or adult and
damage to the unit.
• Move any appliance and cart
combination with care.
Quick stops, excessive force, and
uneven surfaces may cause objects to overturn.
• Carefully follow all operating instructions.
2
I OUTDOOR ANTENNA INSTALLATION I
1 SAFE ANTENNA AND CABLE CONNECTION
An outside antenna or cable system must be properly
grounded to provide some protection
against built up static charges =_._
and voltage. Section 810 _ _-%_ -.
of the National Electdcal _ _ "_._==_
Code, ANSI/NFPA 70 (in I _'] J_-_=_=--,_
Canada, part 1 of the I.._. _.:-."=:,.. ....
Canad an Electdcal Code) -_L:]_,,t,_._=_:..._.-.
provides information ..............
regarding proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE
POWER LINES OR CIRCUITS
Locate an outside antenna system well away from power
lines and electric light or power circuits so it will never
touch these power sources should it ever fall. When
installing antenna, absolutely never touch power lines,
circuits or other power sources as this could be fatal.
I
USING THE UNIT I
Beforeunitis brought outof storageor movedto a new location,
referagain to the INSTALLATION sectionofthesesafeguards.
1 KEEP UNIT WELL AWAY FROM WATER OR
MOISTURE, such as vases, sinks,tubs, etc.
2 IF EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplugunit and have it inspected
bya qualifiedservice technicianbeforeuse.
3 ELECTRICAL STORMS
Dudnga lightningstorm,or beforeleaving unitunused for
extendedperiods of time, disconnectall equipmentfrom
thepowersource as wellas the antennaand cable system.
4 WHEN UNIT IS PLUGGED IN
• DO NOT OPERATE IF:
- liquidhas spilledinto unit.
- unitwas dropped or otherwisedamaged.
- unitemitssmoke, malodors, or noises.
Immediatelyunplug unit,and have it inspectedby a
servicetechnician to avoidpotentialfire and shock hazards.
• Neverdroporpushanyobject t hroughopenings in unit.
Touchinginternal partsmay cause electricshockor tim hazard.
• Keep magnetic objects, such as speakers, away from
unit to avoid electdcal interference.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer
to avoid risk of fire, shock, or other hazards.
6 CLEANING UNIT
Unplugunit. Use a clean,dry,chemicallyuntreatedclothto
genT removedust or debris.DO NOT USEcleaningfluids,
aerosols,or forced air that couldover-spray, o r seep intounitand
causeelectricalshock.Any substance,such as wax, adhesive
tape,etc. may marthe cabinetsurface.Exposureto greasy,
humid,or dustyareas may adverselyaffectintemalparts.
I SERVICE I
1 DO NOT SERVICE PRODUCT YOURSELF
If,after carefully following detailed operatinginstructions, the
unitdoes not operate properly,do not attempt to open or
removecovers, or make any adjustmentsnot described in the
manual. Unplug unit and contact a qualifiedservice technician.
2 REPLACEMENT OF PARTS
Make sure the service technicianuses only parts specified
by the manufacturer, or have equal safety characteristics
as originalparts. The use of unauthorizedsubstitutes may
resultin fire, electric shock,or other hazards.
3 SAFETY CHECK AFTER SERVICING
After unit is serviced or repaired,request that a through safety
check be done as described in the manufacturer'sservice
literature to insure video unitis insafe operating condition.