Tools - Epson STYLUS 400 User Manual

Disassembly and Assembly
;
Never remove the ink cartridge from the carriage unless the manual specifies to do so.
;
When transporting a printer after repair, be sure to pack the printer for transportation with the ink
cartridge installed.
;
Use only recommended tools for disassembling, assembling, or adjusting the printer.
;
Apply lubricants and adhesives as specified. (See Chapter 6 for details.)
;
Make specified adjustments when you disassemble the printer. (See Chapter 4 for details.)
;
When assembling the printer, if ink cartridge is removed and needs to be installed again, make sure
to install new ink cartridge for the following reasons:

Once the ink cartridge mounted on the printer is removed, air comes in and forms bubbles in the
cartridge. These bubbles clog the ink path and cause printing malfunctions. If an ink cartridge still
in use is removed and installed again, ink quantity will not be detected correctly, since the counter
to check ink consumption is cleared.
;
For the reasons above, be sure to return the printer to the user with a new ink cartridge installed.

3.1.2 Tools

Table 3-1 lists the tools recommended for disassembly, assembly, or adjusting the printer. Use only tools that
meet these specifications.
Phillips (+) Driver No. 2
Phillips (+) Driver No.1
Tweezers
Hexagon Box Driver
(Opposite side: 5.5 mm)
3-2
Table 3-1. Recommended Tools
Tool Commercially
Available
CAUTION
EPSON Part Code
Yes B743800200
Yes B743800400
Yes B741000100
Yes B741700100
EPSON Stylus COLOR 400 Service Manual