Preparation For Wall Mounting - Sony BRAVIA KDL-32L4000 Operating Instructions Manual

Other Information
Preparation for Wall Mounting
This TV can be installed on a wall by using a Wall-Mount Bracket (sold
separately). Before mounting the TV on a wall, the Table-Top Stand must be
removed fi:om the TV.
Sony Wall-Mount
Bracket Model
SU-WL500
Follow tile simple steps below to remove tile Table-Top Stand:
Disconnect all the cables from tile TV.
1
2 Secure the Mounting Hook to the rear of the TV.
3 Adjust the angle of the Mounting Hook.
4 Start removing the screws behind the TV (See illustration below). Do
not remove any other screws fiom the TV.
5 When screws are removed, lilt the TV off the stand. Make sure that you
carry out this task with at least two people. Do not attempt to lift the TV
by yoursell:
For bracket installation, refer to the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise is required in
installing this TV. especially to determine the strength of the wall for
withstanding the TV's weight. For product protection and safety reasons,
Sony strongly recommends that you use the Wall-Mount Bracket model
designed for your TV and the wall-mounting of your TV should be
performed by Sony dealers or licensed contractors.
f
o
5"
37