Connecting The Tv; Cable System Or Vhf/Uhf Antenna System; Cable Box/Digital Cable Box - Sony BRAVIA KDL-32L4000 Operating Instructions Manual

GettingStarted
Connecting the TV
To display clear crisp pictures, you must connect your TV correctly and select
the correct Wide Mode to display the picture in the correct aspect ratio (see
"Changing the Wide Screen Mode" on page 22). It is strongly recommended to
connect the antenna/cable input using the 75-ohm coaxial cable (not supplied)
to receive optimum picture quality signal. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal deterioration. If
you use a 300-ohm twin lead cable, keep it as far away fiom the TV as
possible.
You can also connect a variety of optional equipment to your TV (see page 15).
For multiple equipment connections, please refer to the Quick Setup Guide.
Cable System or
VHF/UHF Antenna
System
Cable or VHF/UHF (or VHF only) Antenna
75-ohm coaxial cable
(not supplied) __ Rear of TV
CABLE/ANTENNA input
From Cable settings in Channel settings, select Cable On or Cable Off for
your type of input signal.
Cable Box/Digital
Cable Box
"_° To change channels using
the cable box, set your TV
to channel 3 or 4
depending on the cable
box channel output.
Auto Program will fix the
channel automatically.
Use this hookup if
[] You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
[] You do not intend to hook up any other audio or video equipment to
your TV.
75-ohm coaxial cable
Cable (not supplied)
IN _ OUT
jack l,ack
Also, set CabletoOn inthe Cablesettings inChannelsettings (see page
29).
12