Table of Contents
Advertisement
This TV can be installed on a wall by using a Wall-
Mount
Bracket
(sold
separately).
Before
mounting
the TV on a wall,
the Table-Top
Stand
must
be
removed
from
the TV.
• Do not remove the Table-Top
Stand for any reason
other than to wall-mount
the TV.
Follow tile simple steps below to remove
tile
Table-Top
Stand:
1
Disconnect
all the cables from tile TV.
Gently lay the TV. face down
onto a level and
stable surface covered
with a thick and soft
cloth. Make sure the Table-Top
Stand is
hanging over the edge.
Remove the screws as shown in the
illustration
for your model and pull the Table-
Top Stand out.
Do not remove any other screws from the TV.
• Be sure to store the removed
screws and Table-Top
Stand in a safe place until you are ready to reattach
the
Table-Top
Stand. Keep the screws away from small
children.
• For bracket
installation,
refer to the instruction
guide
provided
by the Wall-Mount
Bracket
model
for your
TV. Sufficient
expertise
is required
in installing
this
TV. especially
to determine
the strength
of the wall for
withstanding
the TV's
weight.
• For product
protection
and safety reasons,
Sony
strongly
recommends
that you use the PC'all-Mount
Bracket
model
designed
for your TV and the wall-
mounting
of your TV should be performed
by a
Sony dealer or licensed
contractor.
Model: KDL-32XBR4
Model: KDL-40D3000
Remove 3 designated screws only.
Remove 4 designated screws only.
Level surface
Table-Top
covered with a
Stand
soft cloth
Level surface
covered with a
Table-Top
soft cloth
Stand
12
Hide quick links:
Advertisement
Table of Contents
