Appendix; Error Message - Kyocera TASKalfa 3050ci Operation Manual

4 Appendix

Error Message

Message
This driver don't correspond to the
connected model.
The fax board is not installed.
FAX connection could not be
made for the following possible
reasons:
If an error message is displayed, check the following remedy.
Check
Is the Network FAX driver for
this product used?
Is the Fax Kit installed on the
machine?
Is the fax machine turned on?
Does an error occur on the
machine?
Is the IP address of the machine
set in the Network FAX driver
correct?
Remedy
Check the product name of the
machine and reinstall the
Network FAX driver. For details,
refer to Installing the Network
FAX Driver
on page 1-1
For network FAX transmission,
install the Fax Kit.
Turn on the machine.
Clear the error and then perform
transmission.
Check the port setting in the
Network FAX driver properties.
.
4-1