Paper Problems - Epson PowerLite 4100 Operator's Manual

TROUBLESHOOTING CHART, CONTINUED
Problem
Print Positioning, continued
Blank Lines Between
Every Line of Print
Prints Across Horizontal
Perforation
Prints Across Left
Vertical Perforation
Prints Across Right
Vertical Perforation
Paper Problems (Positioning, Feeding, Paper Out, Jamming)
PAPER Lit
(With Paper Installed)
PAPER Flashing
*
Avoid printing directly on the platen.
Probable Cause
Printer and Host Both
Supplying Line Feeds
1. Wrong Configuration
Setting
2. Host Changing Forms
Settings
Paper Too Far to the Right
Normal
1. Left Tractor Too Far to
Right
2. Paper Out Sensor Lever
Needs Adjusting
3. Bad Paper Out Sensor
or Electronics Failure
Paper Jam
Operator's Guide 115
Solution
In configuration menu, change
"LF on CR" from "On" to "Off".
1. In configuration menu, change
"Skip Perf" from "Off" to "On".
2. Check print driver settings of
host software. If necessary,
use hex dump mode (Page
132) to check control codes
sent by host.
The left tractor should be
positioned at the far left stop.
Form, column, and margin widths
are controlled by the host
software. Unformatted text prints
a full carriage-width line.
1. Move the left tractor to the far
left so that paper covers the
paper out sensor.
2. Call for service.
3. Call for service.
Clear Jam.
*