Epson Printer User Manual page 23

4. To turn on the computer, press the power button located on
the right side of the front panel, as shown below.
The power indicator lights up. After a few seconds, the
computer displays a count of its system memory, and then
performs its power-on diagnostics. This is a series of checks
the computer runs each time you turn it on to make sure
everything is working correctly.
If necessary, use the controls on your monitor to adjust the
5.
brightness and contrast until you can easily see the
characters on the screen.
6. When the system has successfully completed its diagnostics,
MS-DOS
If they are correct, press
date and time.
1-8 Setting Up Your System
®
prompts you to verify the correct date and time.
Enter.
Otherwise, enter the current