4.3 Relationship between data and dot wires
Fig. 63 shows the relationship between the Bit Image data and the dot wires in the
print head. You can control arbitrary 8 dot wires in the print head.
Fin. 63 Relationship between Data and Dot Wires
If a bit is "1", the print head fires. If a bit is "0", the print head does not fire. For ex-
ample, assume that data are given as follows;
where a box with "0" denotes the bit "1" and a blank box denotes the bit "0". Ac-
cording to Appendix 4, Code Table, you can define (00100010)
As you can see the first 4 bits are defined from column and the second 4 bits
- 7 1 -
NOTE:
In the Bit Image mode,
the 9th dot wire cannot
be used.
as < 22 >
2
and
H