Table of Contents
Advertisement
Chapter 1
Take a minute to gawk at all the stuff in the box. Wow! As Custer said, "Look
at all those . . . " well, anyway.
Wonder how they sell it as cheap a they do? (Hope it prints as good as it looks.)
The Epson Connection
Figure l-7 shows the location of the moveable wire. It is between the 2 "pull
top" terminals, and is labeled "auto. " To
transfer to the other, pull up
insert it fully in a terminal and press the colored top down. Pull gently on the
wire to be sure it is securely locked.
If the "auto" wire is connected to the
on the computer to send its own LF along with CR. That's what's needed for
Apple-type computers.
If the "auto" wire is connected to the
added when a CR is received from the computer. This is what's needed for the
TRS-80 and
other computers.
most
Terrific. So where do we put the wire for
6
Figure 1-7
the wire from one terminal for
release
on its colored top. To
gently
(or orange) terminal, the printer relies
red
terminal, a LF will automatically be
white
computer?
our
a wire in place,
lock
Advertisement
Table of Contents
