Emulation Selection - Epson MTX 1345 Operator's Manual

1.12 Emulation Selection

The following emulations are included in the PM Ser/Par E:
- Philips GP in Macro 1
- IBM ProPrinter XL 24 in Macro 2
- IBM ProPrinter XL 24 AGM in Macro 3
- EPSON LQ / ESC/P2 in Macro 4
To change from one emulation to another, follow the procedure below. The
example shows the keys to press along with the display information for a
change from EPSON LQ / ESC/P2 in macro 4 to IBM ProPrinter in macro 2.
1. Switch the printer ON. The display shows READY 4 ELQ.
2. MACRO 2
3. [Y] READY
The information READY 2 IPP indicates the selected macro and the
emulation of this macro, for example:
1 GP Macro 1 with GP Emulation
2 IPP Macro 2 with IBM Proprinter Emulation
3 AGM Macro 3 with IBM Proprinter AGM Emulation
4 ELQ Macro 4 with Epson Emulation.
A number of VALUE settings is summarized in a "Macro". It is
Note:
possible to have a total of four macros, each with a different sum-
mary of VALUE settings.
Getting Started
(Default)
2 IPP
1-25 1-26