Site Consierations; Environment Conditions; Power Requiremens; Transport Lock - Epson MTX 1345 Operator's Manual

Site Considerations

Environment Conditions

- Install the printer in an area away from any heat source, air conditioner or
strong drafts.
- Avoid installing the printer in a dusty or humid environment.
Work Location
- Place the printer on the stand or a flat, solid level area such as a desk.
- Slots and openings in the printer's housing are provided for ventilation;
always ensure that these openings are not obstructed.
- When processing fanfold paper always place the printer with its front edge
slightly off the edge of the table.
- Also ensure that the cables at the rear of the printer do not interfere with the
output paper path.
Power Requirements
- No special wiring is required. A typical office wall outlet is sufficient.
- Do not plug into the same wall outlet other equipment besides the printer
such as coffee machines, copy machines or air conditioners.
Getting Started Getting Started

Transport Lock

You will find a red shipping tab under the top cover (2).
Grasp the top cover (2) on the left and right, lift it and remove the transport
locking clip (12) from the print head drive belt.
Re-packing Information
To ensure maximum protection when transporting the printer, always
- Remove any installed paper handling option.
- Remove the output stacker and the mains cable.
- Remove the ribbon cassette.
- Reposition the transport locking clip.
- Pack the printer in its original packing material and ship in its original box.
1-3 1-4
2
9