Table of Contents
Advertisement
1 Introduction
This manual provides information that is useful for planning and preparing for the installation of
HP 3PAR Storage Systems. Use this document in conjunction with the 3PAR Systems Assurance
and Pre-Installation Site Planning Guide that details specific system configuration and installation
information for your storage server and operating site.
Physical planning and preparation are essential to a successful installation. If you have concerns
or issues not specifically addressed in this manual, (or your systems planning document), contact
your local HP 3PAR Sales Representative or HP 3PAR Systems Engineer.
NOTE:
The InServ Storage Server has been rebranded as HP 3PAR Storage System. There are
instances in this document where menu items and command output refer to the HP 3PAR Storage
System as InServ or InServ Storage Server.
Related Documentation
The following documents also provide information related to HP 3PAR Storage Systems and the
InForm® Operating System that might be useful in preparing to install, configure and operate the
equipment.
Table 1 Related Documentation
For information about...
Storage system concepts and terminology
Using the InForm Management Console to configure and
administer HP 3PAR Storage Systems
Using the InForm Command Line Interface (CLI) to configure
and administer HP 3PAR Storage Systems
CLI commands and their usage
Typographical Conventions
The following typographical conventions are used in this guide:
Table 2 Typographical Conventions
Typeface
ABCDabcd
ABCDabcd
ABCDabcd
ABCDabcd
ABCDabcd
Advisories
Before installing an HP 3PAR Storage Systems, consult the Agency Compliance Statements at the
end of this book, to obtain important safety information.
6
Introduction
Read the...
HP 3PAR InForm OS Concepts Guide
HP 3PAR InForm Management Console On-Line Help
HP 3PAR InForm OS CLI Administrator's Manual
HP 3PAR InForm OS Command Line Interface Reference
Meaning
Used for dialog box elements such as
titles and button labels.
Used for file names, paths, and screen
output, and for text you are to enter.
Used to contrast your input with system
output.
Used for variables in file names,
paths, and screen output, and
variables in user input.
Example
Enter your system name in the Value
box and click OK.
Found < 12 > 73G disks.
Enter cli at the Windows command
prompt.
cli% removevv VV1
Removing vv VV1.
[root@(systemID-nodeID)root]
To continue Enter your system
name ==> systemname
Hide quick links:
Advertisement
Table of Contents
