Setting.wpa-Eap.or.wpa2-Eap - NEC NP1150 - XGA LCD Projector Manual

3. Setting WPA-EAP or WPA2-EAP
Select a wireless LAN compliant WPA-EAP or WPA-EAP authentication and install a
digital certificate on the projector.
❶ Set [DATE, TIME PRESET] on the pro-
jector. (See previous page)
❷ Use a computer to save digital certifi-
cates (files) for WPA-EAP or WPA2-EAP
setting to your USB memory device.
After completing saving the file, remove the
USB memory device from the computer.
Important:
• The file formats of digital certificate that are supported by the projector are DER and
PKCS#1 only.
• The projector cannot handle any digital certificate whose file size exceeds 8 KB.
• CRL (Certificate Relocation List) is not supported.
• Client certificate chain is not supported.
❸ Plug the USB memory device into the
USB port of the projector.
❹ Repeat steps ❶ on page 5 to ❽ on page
6.
The pull-down list will be displayed.
❺ Use the SELECT ▼▲ button to select
[WPA-EAP] or [WPA2-EAP] and press
the ENTER button.
❻ Use the SELECT ▼ button to select the
[TKIP/AES] field and press the ENTER
button.
The pull-down list will be displayed.
USB port
9