NEC NP1150 - XGA LCD Projector Manual page 10

❼ Use the SELECT ▼▲ button to select
[TKIP] or [AES] and press the ENTER
button.
Select [TKIP] or [AES] according to the setting
for your access point.
❽ Use the SELECT ▲ button to select the
[SECURITY] tab and press the SELECT
▶ button.
The [AUTHENTICATION] page will be dis-
played.
Select either [EAP-TLS] or [PEAP-MSCHAPv] for [EAP TYPE]. The setting items vary
depending on the EAP type.
See the table below.
EAP Type
EAP-TLS
PEAP-MSCHAPv
① Selecting [EAP-TLS] for [EAP TYPE]:
The following section explains the operation for selecting [EAP-TLS].
For selecting [PEAP-MSCHAPv], go on to Step ➒ on page 13.
❾ Use the SELECT ▼ button to select
[USER NAME] field and press the EN-
TER button.
The character entry screen (software keyboard)
will be displayed. Set a user name.
• A user name must be 1 character or more
and 3 characters or less.
• See page  of "Wired and Wireless Network
Setup Guide" for using the software keyboard
to enter characters.
10
Setting Item
User Name
Client Certificate
CA Certificate
(Certificate authority's certificate)
User Name
Password
CA Certificate
(Certificate authority's certificate)
Note
1 character or more and 3 characters or
less
PKCS#1 format file
DER format file
1 character or more and 3 characters or
less
1 character or more and 3 characters or
less
DER format file