Setting.wpa-Psk.or.wpa2-Psk - NEC NP1150 - XGA LCD Projector Manual

1. Setting WPA-PSK or WPA2-PSK
From the on-screen menu on the projector, select [SETUP] → [INSTALLATION()] tab
→ [NETWORK SETTINGS] screen and follow the instructions below.
➊ Display the [NETWORK SETTINGS]
screen.
• See page 17 of "Wired and Wireless Network
Setup Guide" for setting wireless LAN.
➋ Use the SELECT ▶ button to select the
[WIRELESS] tab.
The [WIRELESS] page will be displayed.
➌ Set items such as PROFILE, DHCP, IP
ADDRESS, SUBNET MASK and others
as required.
• Select [PROFILE 1] or [PROFILE ] for
[PROFILES]. If [EASY CONNECTION] is se-
lected, WPA-PSK, WPA-PSK, WPA-EAP, or
WPA-EAP is not available.
➍ Use the SELECT ▼ button to select
[ADVANCED SETTINGS] and press the
ENTER button.
The [ADVANCED SETTINGS] screen will be
displayed.
➎ Select [SITE SURVEY] and press the
ENTER button.
The "SSID" list will be displayed.
5