Introduction - NEC NP1150 - XGA LCD Projector Manual

Thank you for purchasing the LCD Projector NP3150/NP150/NP1150/NP3151W.
This guide explains how to set the enhanced wireless LAN security (authentication
method) on the projector as shown on the table below.
Set the projector according to the security environment of your network.
Authentication
method
WPA-PSK,
WPA-PSK
(→ Page 5)
Wireless LAN
WPA-EAP,
WPA-EAP
(→ Page 9)
Important:
• Please note that instructions and explanation on security functions on the above table is
not included in the supplied "User's Manual" or within the "Wired and Wireless Network
Setup Guide".
• When you set WPA-EAP or WPA-EAP, be sure to set [DATE, TIME PRESET] before
installing digital certificates.
If setting of [DATE, TIME PRESET] is not correct, a message "authentication error" will be
displayed.
• To install digital certificates on the projector, use a USB memory device in the market.

Introduction

Encryption
EAP type
type
TKIP
–
AES
EAP-TLS
TKIP
AES
PEAP-
MSCHAPv
(→ page 8)
Digital certifi- Format of
cate certificate
Not used –
Client certificate PKCS#1
CA Certificate DER
CA Certificate DER
Continued on next page
3