Port Mirroring Configuration - TRENDnet TE100-S810Fi User Manual

<Next page>: Go to next page to configure.

4-3-3. Port Mirroring Configuration

The port mirroring is a method for monitor traffic in switched networks.
Traffic through ports can be monitored by one specific port. That is traffic
goes in or out monitored ports will be duplicated into monitoring port.
Press Space key to change configure of per item.
1.Analysis State: Type YES or NO for port-morrioing function.
2.Mirroring Port: It's mean mirror port can be used to see all monitor port
traffic.
3.Source Port: The ports you want to monitor. All monitor port traffic will
be copied to sinffer port. You can select max 9 monitor ports in the switch.
User can choose want to monitored RX frames only or TX frames only or
both RX and TX frame from the port at Action item.
Actions->
<Quit>: Exit the page of port monitoring configuration and return to
previous menu.
<Edit>: Configure all items. Finished configure press ESC to go back
action menu line.
<Save>: Save all configure value.
<Previous Page>: Return to previous page to configure.
<Next page>: Go to next page to configure.