Table of Contents
Advertisement
Restore Configuration Settings: Click on the "Browse" button to open a
FileOpen Dialog box, where users can load previously saved settings and
configurations. Upon selecting the saved file, click "Upload" and complete the
restore process when the access point re-operates after it restarts.
Factory default settings: Click on "Restore" button to restore the access point
back to its manufacture default settings.
Firmware Upgrade: Click on the "Browse" button to open a FileOpen Dialog box,
where gets to select the firmware file, which download from the web for the latest
version. Upon selecting the firmware file, click "Upload" and complete the
firmware upgrade process when the Access Point re-operates after it restarts.
Wi-Fi Protected Setup
Wi-Fi Protected Setup: Enable or Disable the WPS (Wi-Fi Protected Setup)
function
Status: Display the state (Un-configured State/Configured State) information of
WPS.
Self-PIN Number: Displays the default PIN number of the Access Point.
Client PIN Number: Type the Client's PIN number to negotiate with the Access
Point via WPS protocol. It is only used when users want their station to join the
WLAN's network.
Push Button Configuration: Clicking the Start PBC button will invoke the Push
Button Configuration (PBC) method of WPS. It is only used when the Access
Point acts as a Registrar.
SNMP: Enable or Disable the SNMP function.
24
Advertisement
Table of Contents
