Table of Contents
Advertisement
Appendix-Removing T V Stand
If you decide to install the wall mount your LCD TV, always use a VESA standard wall mount appropriate
for the size and weight of the LCD TV.
CAUTION
•
Be sure to follow
the instructions.
Incorrect
installation
of the stand/wall
mount
may result in the
TV falling
over.
•
Before
attaching
(or detaching)
the stand,
unplug
the AC cord from the AC input terminal.
•
Unplug
and remove
any cables
and/or
other component
connectors
from the rear of the TV.
NOTES
Before proceeding,
make sure the appropriate
bracket(s)
are attached to the wall and the back of the TV as
described
in the instructions
provided with the wall bracket. Extreme care should always be used when
removing the stand/wall mount to avoid damage to the LCD panel.
As shown below:
(The picture may vary depending
on the model.)
PROCEDURE
1. Place
the
TV
set
on
a
surface
that
is
totally
stable,
flat
and
smooth(such
as
table). The front panel of TV should face the surface.
Remove
6 screws signed
in red circles.
2. Draw out the stand gently.
3]
Advertisement
Table of Contents
