Removing Tv Stand - ProScan 40LD45QC User Manual

Appendix- Removing TV Stand
If you decide to install the wall mount your LCD TV, always use a VESA standard wall mount appropriate
for the size and weight of the LCD TV.
CAUTION
• Be sure to follow the instructions. Incorrect installation of the stand/wall mount may result in the
TV falling over.
• Before detaching (or attaching) the stand, unplug the AC cord from the AC input terminal.
• Unplug and remove any cables and/or other component connectors from the rear of the TV.
NOTES
Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as
described in the instructions provided with the wall bracket. Extreme care should always be used when
removing the stand/wall mount to avoid damage to the LCD panel.
As shown below:
(The picture may vary depending on the model.)
Loose 6
PROCEDURE
Place the TV set on a surface that is totally stable, flat and smooth, such as a table.
1. Loose the 6 black rear screws in TV.
(The 6 black rear screws are completely the same.)
2. Draw out the stand gently.
35