Table of Contents
Advertisement
Basicoperation- ChoosingTV Channel
TURN ON LCD TV
1. Connecting to the AC input cable to switch on LCD TV. At this time the TV will enter standby mode and indicator show red.
2. User POWER button or
button on the remote
control can turn on LCD TV from standby
mode.
TURN OFF LCD TV
1. Press POWER button or _
button on the remote control to enter standby mode. The indicator is red.
2. Wait 5 seconds after switching off LCD TV then you can turn on LCD TV again.
1.
Using the CH + / CH - on the front panel or on the remote control.
•
Press CH + to increase channel number.
•
Press CH - to decrease channel number.
2.
3.
Using 0-9 digital buttons and - button
You can select the channel number by pressing 0 to 9
For example:
IN ANALOG SIGNAL:
To select channel (e.g. Channel 22): Press 2 -> 2 ->ENTER,It will jump to 22-0 directly
IN DIGITAL SIGNAL:
To select digit channel (e.g. Channel 22-1 ): Press 2 -> 2 -> - > 1 ->ENTER,the program will appear immediately.
NOTE: Sub channel number of analog channel is always zero. But when you in the digital signal, if you enter
physical channel
number and not end with "ENTER",
channel
selection will be made if there is no
operation within a few seconds.
]3
Advertisement
Table of Contents
